The Blood of Dawnwalker PC Requirements — All Four Tiers Explained

TL;DR

• The Blood of Dawnwalker PC requirements go from a GTX 1060 / RX 580 at minimum up to an RTX 4070 Ti / RX 9070 for 4K Ultra.
• All tiers need 16 GB RAM, 60 GB SSD, Windows 10, and DirectX 12 — no exceptions.
• The final specs assume DLSS, FSR, or XeSS upscaling in Balanced mode is switched on. Turn it off and you will need stronger hardware.
• There are four performance tiers: Low (1080p/30fps), Medium (1080p/60fps), High (1440p/60fps), and Ultra (4K/60fps).
• VRAM is the real bottleneck — you need at least 6 GB to get in, and 12 GB for 4K.
• An SSD is mandatory. A hard drive is not supported.
• The game uses Unreal Engine 5 and supports Intel Arc cards — which is rare for a big 2026 title.

The Blood of Dawnwalker PC requirements are better news than most people expected. Rebel Wolves released the final spec sheet in August 2026, and after an optimization pass, the numbers came down significantly from the early April reveal. If you saw the original specs and worried your machine would not handle it, read this carefully — you might be fine. For a full overview of the game itself including story, editions, and pricing, check out our complete Blood of Dawnwalker release date and editions guide.

This article breaks down every tier with the exact CPU, GPU, and VRAM figures, explains what the upscaling requirement actually means for your setup, and gives you practical advice on which tier to target. If you are brand new to the game, our Blood of Dawnwalker Beginner’s Guide covers everything from the day-night mechanics to the 30-day time limit before you start.

The Blood of Dawnwalker PC System Requirements — All Four Tiers

Rebel Wolves published four performance tiers with the final spec sheet. Every single tier shares the same RAM, storage, and OS baseline — the differences are entirely on the CPU and GPU side.

Baseline requirements that apply to every tier:

• OS: Windows 10 (64-bit) or higher
• DirectX: Version 12
• RAM: 16 GB
• Storage: 60 GB SSD (hard drives are not supported)

Low — Minimum (1080p / 30 FPS)

• CPU: Intel Core i5-11400F or AMD Ryzen 7 2700X
• GPU: NVIDIA GeForce GTX 1060 or AMD Radeon RX 580
• VRAM: 6 GB or higher

This is the floor. A GTX 1060 is a decade-old card. The RX 580 is not far behind it. The fact that either card can run a 2026 Unreal Engine 5 open-world RPG — even at 30fps on Low — is a real sign that Rebel Wolves put work into scalability. You will be playing with upscaling doing heavy lifting, but you will be playing.

Medium (1080p / 60 FPS)

• CPU: Intel Core i7-11700K or AMD Ryzen 7 5700X
• GPU: NVIDIA GeForce RTX 2060 SUPER / GTX 1070 Ti / AMD Radeon RX 5700 / Intel Arc A750
• VRAM: 8 GB or higher

This is where the game starts to feel smooth. The CPU asks for a meaningful step up — the i7-11700K and Ryzen 7 5700X are mid-range chips from around 2021, so most modern PCs built in the last four or five years will clear this comfortably. Notice that Intel’s Arc A750 appears here, which is unusual for a big 2026 release. It means an Arc build is a legitimate path, not just a footnote.

High — Recommended (1440p / 60 FPS)

• CPU: Intel Core i7-11700K or AMD Ryzen 7 5700X
• GPU: NVIDIA GeForce RTX 4060 / AMD Radeon RX 7600 XT / Intel Arc B580
• VRAM: 8 GB or higher

This is Rebel Wolves’ own recommended target — 1440p at 60fps on High settings. The CPU is actually the same as the Medium tier. All the scaling happens on the GPU. The RTX 4060, RX 7600 XT, and Arc B580 are all mid-range modern cards. If you bought a new GPU in the last two years, there is a solid chance you are already here or above. This is the tier most PC players should plan around.

Ultra (4K / 60 FPS)

• CPU: Intel Core i7-12700K or AMD Ryzen 7 7800X3D
• GPU: NVIDIA GeForce RTX 4070 Ti or AMD Radeon RX 9070
• VRAM: 12 GB or higher

This is 4K at 60fps on Ultra settings — still with upscaling running in Balanced mode. The RTX 4070 Ti is a powerful but not extreme card for 2026. The RX 9070 from AMD sits in the same bracket. The CPU asks for either an i7-12700K or the Ryzen 7 7800X3D, which is notably strong on the AMD side given its 3D V-Cache advantage. You will need 12 GB of VRAM at this tier — anything less and you will hit memory pressure at 4K.

The Upscaling Situation — What It Actually Means

This is the most important thing to understand about these requirements, and most articles skip over it.

The final spec sheet from Rebel Wolves assumes DLSS, FSR, or XeSS is switched on in Balanced mode. These are upscaling technologies that render the game at a lower internal resolution and then reconstruct the image to your output resolution. They improve performance significantly, but the image is not the same as native rendering.

The original specs published in April 2026 were measured at native resolution with no upscaling and no frame generation. That is why those early numbers looked so much heavier. The April sheet listed an RTX 5090 for native 4K at 60fps Ultra. The final sheet lists an RTX 4070 Ti for the same target — with upscaling doing part of the work.

What this means practically:

• If you want to play at the listed frame rates with upscaling off, you should target one tier above your resolution goal.
• If you are fine with DLSS or FSR running in Balanced mode (which most players are), the listed specs are accurate.
• DLSS is available on NVIDIA RTX cards. FSR works on almost everything. XeSS is Intel’s version but also runs on other hardware at reduced quality.

The game supports all three upscaling technologies at launch, so regardless of which GPU brand you have, you will have an option.

VRAM — The Real Bottleneck to Watch

Raw GPU performance matters, but VRAM is what catches people off guard in modern open-world games. When the game streams in assets across a large area — forests, settlements, combat zones — it pulls heavily from video memory. Running out causes texture pop-in and stuttering that raw clock speed cannot fix.

• 6 GB VRAM — gets you in at 1080p/30fps on Low. This scrapes the minimum.
• 8 GB VRAM — covers Medium (1080p/60fps) and the High/Recommended (1440p/60fps) tiers.
• 12 GB VRAM — required for Ultra at 4K. An 8 GB card will not reach this tier regardless of how fast the GPU itself is.

If you have an 8 GB GPU and want to hit 1440p at 60fps, you are right at the threshold. Monitor VRAM usage once the game is running and drop a setting or two if you see stuttering in dense areas like towns or heavy combat scenes.

RAM and Storage Requirements

RAM

Every tier requires exactly 16 GB of RAM. That is the floor and the ceiling across all four configurations — the requirement does not go up for higher tiers. If you are sitting on 16 GB, you meet the spec across the board. In practice, running 32 GB gives you headroom when the OS and background apps are eating into available memory, but 16 GB is the official figure Rebel Wolves stands behind.

Storage

The install size is 60 GB, and it must sit on an SSD. This is not optional. Rebel Wolves explicitly specifies solid-state storage, and a traditional spinning hard drive is not supported. The reason is how the game streams data. Vale Sangora is a large open world with continuous asset loading as you move through it. An SSD feeds that data fast enough to keep up. A hard drive cannot.

60 GB is modest by 2026 standards. If you are managing a full drive, this is one game that will not eat half your storage in one shot. An NVMe drive is not required — a standard SATA SSD will do — but faster storage will help with load times and any traversal hitching.

Operating System and API

The game requires Windows 10 (64-bit) or higher with DirectX 12. Windows 11 is fully supported. There is no Linux or Steam Deck confirmation at launch. The game runs on Unreal Engine 5, which has known shader compilation stutter issues on some systems — keep an eye on day-one patch notes and driver updates before and after launch.

The Two Spec Sheets — Clearing Up the Confusion

If you have been researching these requirements across different sites, you have probably seen two different sets of numbers being cited. Here is why.

Rebel Wolves published an early spec sheet in April 2026 during their Road to Launch event. Those figures were tested at native resolution with no upscaling — meaning every GPU listed had to hit the target frame rate on its own. That sheet listed the RTX 5090 for 4K Ultra.

In August 2026, Rebel Wolves released the final, revised spec sheet after an optimization pass on the game. These final numbers assume DLSS, FSR, or XeSS in Balanced mode is running. That change alone dropped the GPU requirement for 4K Ultra from an RTX 5090 to an RTX 4070 Ti. The CPU side also shifted, with the Ryzen 7 7800X3D appearing at the Ultra tier instead of the Ryzen 9 7950X.

The final August 2026 sheet is the one to use. That is what the game will actually ask for when you install it.

Which Tier Should You Target?

Here is a simple way to think about it based on your setup.

If you have an older or budget GPU (GTX 1060, RX 580 class)

You can run the game at 1080p/30fps on Low settings with upscaling on. It is playable, but this is the survival tier. If your card has 6 GB of VRAM, make sure nothing else is competing for it when the game is open. Lower shadow and texture settings first if you hit stutter.

If you have a mid-range card from 2020–2022 (RTX 2060, RX 5700 class)

You are in the Medium bracket — 1080p at 60fps. This is a solid experience. Enable DLSS or FSR and let the Quality or Balanced preset do the work. The game should feel smooth in most scenarios at 1080p.

If you have a current mid-range card (RTX 4060, RX 7600 XT, Arc B580)

You are at the Recommended tier — 1440p at 60fps. This is where most PC players will sit, and it is a genuinely good place to be. Turn on your preferred upscaler, set quality to High, and you should hit 60fps consistently across the open world and in combat.

If you have a higher-end card (RTX 4070 Ti, RX 9070 or above)

You are in Ultra territory — 4K at 60fps. Make sure you have 12 GB of VRAM on the card. If you are on an 8 GB card but with a fast GPU (like an RTX 4070), you may still hit issues at 4K even with upscaling. Drop to 1440p Ultra instead and the image quality will be excellent.

Performance Tips Before You Launch

• Enable upscaling first. The game is tuned with upscaling in mind. Turn on DLSS, FSR, or XeSS in Balanced mode before touching anything else. That one step will give you the most performance for the least visual cost.
• Watch your VRAM usage. Open your GPU monitoring tool after loading into Vale Sangora. If VRAM is near or at the limit, lower shadow quality and texture resolution first — those two settings carry the most VRAM weight.
• Keep your GPU drivers up to date. Rebel Wolves is using Unreal Engine 5. Both NVIDIA and AMD typically push game-specific driver updates within a few days of a major launch that fix early shader and performance issues.
• Do not run on a hard drive. Even if the game technically loads, you will get significant asset streaming problems in dense open-world areas. An SSD is not a suggestion — it is part of the requirement.
• Close background apps. With 16 GB of RAM as the baseline, a browser with tabs open, Discord, and other apps can push you close to your memory ceiling. Close what you do not need before launching.

Quick Reference Table — All Four Tiers

Tier	Target	CPU	GPU	VRAM	RAM	Storage
Low (Minimum)	1080p / 30fps	i5-11400F / Ryzen 7 2700X	GTX 1060 / RX 580	6 GB+	16 GB	60 GB SSD
Medium	1080p / 60fps	i7-11700K / Ryzen 7 5700X	RTX 2060 SUPER / RX 5700 / Arc A750	8 GB+	16 GB	60 GB SSD
High (Recommended)	1440p / 60fps	i7-11700K / Ryzen 7 5700X	RTX 4060 / RX 7600 XT / Arc B580	8 GB+	16 GB	60 GB SSD
Ultra	4K / 60fps	i7-12700K / Ryzen 7 7800X3D	RTX 4070 Ti / RX 9070	12 GB+	16 GB	60 GB SSD

All tiers assume DLSS, FSR, or XeSS upscaling in Balanced mode is active. All tiers require Windows 10 (64-bit), DirectX 12, 16 GB RAM, and 60 GB SSD.