Enshrouded PC Requirements – Can Your PC Run It?

TL;DR

• Enshrouded 1.0 is now fully launched on PC and PS5.
• Minimum specs are modest — any gaming PC from the last five years should clear them.
• You need at least 6GB VRAM regardless of which GPU you use. This is a hard requirement.
• RAM requirement is 16GB for both minimum and recommended.
• Storage needed: 60GB. No SSD required.
• The game supports DLSS (Nvidia) and FSR (AMD) — use them for easy FPS gains.
• Fog Quality and Contact Shadows are the two biggest FPS killers on lower-end systems.
• Steam Deck can run it but is not officially verified and performance is limited.

Can Your PC Run Enshrouded?

Enshrouded runs on a custom-built voxel engine that Keen Games developed specifically for this game. It looks beautiful — the lighting, the Shroud fog effects, the open world draw distances. But that visual quality comes with real hardware demands, especially on the GPU side.

The good news is that the Enshrouded PC requirements are not extreme. The minimum bar is low enough that most gaming PCs built in the last five years will clear it without trouble. Even the recommended specs are well within reach of a mid-range setup.

The 1.0 release also came with a dedicated performance pass from Keen Games. They specifically worked to improve frame rates on lower and mid-range systems ahead of the full launch. So if you played in Early Access and had issues, things should be better now.

Already planning to play? Check our Enshrouded Tips and Tricks Beginner’s Guide before you start — it will save you a lot of early-game frustration. You can also grab the game on Steam or the PlayStation Store, and find more details at the official Enshrouded website.

Enshrouded Minimum PC Requirements

These are the bare minimum specs to get the game running. At minimum settings you should be able to hit a playable frame rate at 1080p, but expect to lower several graphical settings to get there.

• OS: Windows 10 (64-bit)
• CPU: Intel Core i5-6400 (2.7 GHz, 4 Core) / AMD Ryzen 5 1500X (3.5 GHz, 4 Core)
• RAM: 16 GB
• GPU: NVIDIA GeForce GTX 1060 / AMD Radeon RX 580 / Intel Arc A380
• VRAM: 6 GB minimum — this applies to all GPUs listed
• Storage: 60 GB available space
• Internet: Broadband connection required

One thing worth highlighting here: the 6GB VRAM requirement is non-negotiable. Even at minimum settings, Enshrouded’s voxel world needs that VRAM to load properly. If your GPU has 4GB or less, you will likely hit crashes or severe stuttering regardless of other specs. This is the one requirement that trips up older mid-range cards.

Enshrouded Recommended PC Requirements

These are the specs to target for a smooth 1080p experience at high settings with consistently good frame rates. If you are on the recommended specs or above, you should not need to tinker much.

• OS: Windows 10 (64-bit)
• CPU: Intel Core i7-8700 (3.7 GHz, 6 Core) / AMD Ryzen 7 2700X (3.7 GHz, 8 Core)
• RAM: 16 GB
• GPU: NVIDIA RTX 2070 Super / AMD Radeon RX 6700 XT / Intel Arc A770
• VRAM: 6 GB minimum — 8 GB or more recommended for better performance
• Storage: 60 GB available space
• Internet: Broadband connection required

The jump between minimum and recommended is not enormous, but the six-core CPU makes a real difference in Enshrouded. The voxel engine is demanding on the CPU, especially in large built-up base areas and dense forest biomes. A six-core processor handles those situations significantly better than a four-core chip.

Enshrouded PC Requirements at a Glance

Here is a side-by-side comparison of both tiers for quick reference:

• OS: Windows 10 (64-bit) — both tiers
• CPU (Minimum): Intel i5-6400 / AMD Ryzen 5 1500X
• CPU (Recommended): Intel i7-8700 / AMD Ryzen 7 2700X
• RAM: 16 GB — both tiers
• GPU (Minimum): GTX 1060 / RX 580 / Arc A380 — 6GB VRAM required
• GPU (Recommended): RTX 2070 Super / RX 6700 XT / Arc A770 — 6GB VRAM required
• Storage: 60 GB — both tiers
• SSD Required: No

What GPU Do You Actually Need for Enshrouded?

The GPU side is where most players need to think carefully. The 6GB VRAM floor is firm. Beyond that, here is how common cards stack up at 1080p:

GTX 1060 6GB / RX 580 8GB (Minimum Tier)

These cards will run Enshrouded at 1080p on low-to-medium settings. Expect somewhere in the 40-60 FPS range depending on the area. Turn Fog Quality to Low, disable Contact Shadows, and use FSR or DLSS if available. Playable but not comfortable without settings work.

RTX 2060 / RX 5700 XT (Mid-Range)

This range sits between minimum and recommended. You can run 1080p at medium-high settings comfortably with DLSS or FSR enabled. A solid experience overall.

RTX 2070 Super / RX 6700 XT (Recommended Tier)

High settings at 1080p with smooth frame rates. 1440p is also achievable at medium settings with upscaling on. This is the sweet spot for Enshrouded right now.

RTX 3060 / RX 6600 XT and Above

These cards handle 1080p at high-to-ultra settings without needing to compromise much. Community benchmarks put an RTX 3060 at around 77 FPS at 1080p with optimized settings, which is very comfortable for a game like this.

RTX 4070 / RX 7800 XT and Above

1440p at high settings becomes the norm here. These cards give you the headroom to turn settings up fully and still maintain excellent frame rates across all biomes including heavy Shroud zones.

Best Graphics Settings for Enshrouded – Performance Guide

Even on a strong PC, a few settings in Enshrouded hit frame rates harder than others. Here is what to adjust for the best balance of performance and visual quality.

Settings That Hit FPS the Hardest

• Fog Quality — This is the biggest one. Because the Shroud is such a core part of the game, volumetric fog is rendered constantly. Set it to Low or Performance if you are on a weaker system. The community consistently flags this as the single best FPS recovery setting in Enshrouded.
• Contact Shadows — Turn this Off. It causes flickering artifacts in forests and hits performance hard. Disabling it has almost no visible downside and gives a meaningful FPS boost.
• Voxel Detail Models — Lower this on CPU-limited machines. The voxel engine places heavy CPU strain on terrain detail. Reducing Voxel Detail Models is essential on four-core or older processors.
• Small Foliage — Set to Performance or Off on low-end systems. The world is packed with grass and plant detail that adds up fast on older hardware.
• Shadow Quality — Set to Performance on lower-end setups. Shadows are always one of the biggest GPU cost items in any game and Enshrouded is no exception.
• Point Light Shadows — Set to Performance. Low visual impact at distance, meaningful FPS saving near base lighting.

Settings That Are Safe to Keep High

• Texture Resolution — This affects VRAM use, not raw FPS. As long as you have 6GB+ VRAM, keep this at High for visual quality with minimal frame rate cost.
• Reflections — Surprisingly low performance cost in Enshrouded. Keep this at Quality unless you are genuinely struggling for FPS.
• Anti-Aliasing — Use DLSS on Nvidia cards or FSR on AMD. Both upscalers give 20-30 FPS gains with minimal visual quality loss. Set DLSS to Balanced or Quality depending on your target. Do not use FXAA — it looks acceptable but gives you none of the performance benefit of DLSS or FSR.

Recommended Optimized Settings for Low-End PCs

• Display Mode: Fullscreen
• Anti-Aliasing / Upscaling: DLSS Balanced (Nvidia) or FSR Quality (AMD)
• Texture Resolution: High
• Shadow Quality: Performance
• Fog Quality: Low
• Contact Shadows: Off
• Small Foliage: Performance or Off
• Tesselation: Performance
• Voxel Detail Models: Low
• Reflections: Quality
• Volumetric Shadow Quality: Performance
• Point Light Shadows: Performance

These settings will recover a large portion of your FPS without making the game look bad. Fog, shadows, and foliage are where the budget goes on low-end hardware. Textures and reflections are safe to keep up.

One Extra Tip – Lock Your Frame Rate

A lot of players report that Enshrouded feels smoother when capped at 60 FPS rather than running fully uncapped. The voxel engine can produce inconsistent frame pacing when uncapped on mid-range hardware. If you are getting variable FPS and it feels rough despite a decent average, try locking it to 60 and see if it smooths out.

Does Enshrouded Run on Steam Deck?

Technically yes, but not officially. Enshrouded is listed as Unverified on Steam Deck’s compatibility page. The game does launch and run using Proton, and full gamepad support works. However, performance is poor at default settings.

On the Steam Deck OLED, the default settings struggle to even hit 30 FPS consistently. The voxel engine is simply too GPU-hungry for the Steam Deck’s hardware to handle well. You can tweak settings significantly to improve things, but it is not a comfortable experience and we would not recommend it as a primary way to play Enshrouded.

If you want to try it anyway, use Proton 8 or Proton Experimental, lower everything to the minimum settings, and manage expectations. It works, but it is not optimized for the device.

Does Enshrouded Need an SSD?

No. Enshrouded does not require an SSD. There are essentially no loading screens in the game — the world is a seamless open environment — so a standard hard drive works fine. That said, if you do have an SSD available, installing there will improve startup times and any asset streaming that happens in the background.

How Much Storage Does Enshrouded Need?

Enshrouded needs 60 GB of free storage. This is about average for a modern game. The 1.0 release with its new biome and content additions may push this slightly higher over time, so having a little extra headroom on your drive is sensible.

Does Enshrouded Support Windows 11?

Yes. The official requirement lists Windows 10 as the minimum, but Enshrouded runs on Windows 11 without issues. If you are on Windows 11, you should have no compatibility problems.

Enshrouded PC Requirements – FAQ