Silent Hill Townfall Floppy Disk Puzzle Guide – 5 South Brae Solution and Safe Code

TL;DR

  • The Floppy Disk puzzle is in Part 4: Clara Woods, inside the house at 5 South Brae.
  • You need the Disk Case Key (from the bedroom drawer upstairs) and the Fix-A-Disk! Software (from Atlas Computers nearby).
  • Disk 2 of 3 is corrupted — use Fix-A-Disk to repair it before anything else.
  • After repairing, insert Disk 1, then Disk 2, then Disk 3 in order to unzip the data to RAM.
  • Print MANUAL.EML from the computer — it shows a Reciprocating Compressor with Part ID 956.
  • Enter 956 on the locked file box to get the Barcode (South Brae) – Locker 17.
  • Scan that barcode at the CEG Lockers scanner to reveal the Locker 17 pin: 575.
  • Open Locker 17 with code 575 to get the Boltcutters and the first Mechanical Part.
Floppy Disk Puzzle in Silent Hill Townfall
Floppy Disk Puzzle in Silent Hill Townfall

What Is the Floppy Disk Puzzle in Silent Hill Townfall?

The Floppy Disk puzzle is one of the bigger puzzles in Part 4: Clara Woods. It takes place inside the house at 5 South Brae, a residential property on the upper level of the Clara Woods Estate. You cannot enter this house until you have the South Brae House Key, which itself comes from solving the Lost and Found puzzle at the CEG Employee Lockers building first.

The goal of the puzzle is to repair a corrupted floppy disk, run the disks in the correct sequence on the house computer, print out a technical document, and use the part number on that document to open a locked file box. Inside the box is the barcode for Locker 17. That locker holds the Boltcutters — one of the most important items in the Clara Woods section — along with the first of three Mechanical Parts needed to open the Strange Gate on Atlas Way.

The puzzle has more steps than most in the game. But none of them are hard once you know the correct order. The biggest mistake players make is inserting the disks in the wrong sequence, or not repairing Disk 2 before trying to run the data.

For a full overview of Part 4 and everything else in Clara Woods, see our Silent Hill Townfall Clara Woods guide.

Before the Floppy Disk Puzzle – What You Need First

You cannot start the Floppy Disk puzzle until you have done two things:

Get the South Brae House Key
Get the South Brae House Key

Step 1 – Get the South Brae House Key

The South Brae House Key is inside the Lost and Found locker at the CEG Employee Lockers building. Go to that building and read the Lost and Found note on the back office computer. It gives you the combination: 772. Enter 772 on the Lost and Found locker to get the key.

Once you have the South Brae House Key, head to Atlas Square, go up the south stairwell, and use the key on the front door of 5 South Brae to get inside.

Step 2 – Pick Up the Fix-A-Disk! Software

Pick Up the Fix A Disk Software
Pick Up the Fix A Disk Software

Before you can repair the corrupted disk, you need the Fix-A-Disk! Software floppy disk. This is not inside 5 South Brae — it is at the Atlas Computers building, which is the first building to the east of Atlas Square on the ground level.

Go there, push through to the back room, and use your Disk Case Key on the floppy disk case inside. You collect the Fix-A-Disk! Software from there. Hold onto your Disk Case Key — you will need it again back at 5 South Brae in a moment.

Note: You find the Disk Case Key itself inside 5 South Brae, in the drawer beside the bed in the master bedroom upstairs. So the intended order is: enter 5 South Brae → go upstairs → grab the Disk Case Key → head to Atlas Computers → get Fix-A-Disk! Software → return to 5 South Brae.

Where to Find the Grouped Floppy Disks

The three floppy disks you need are inside 5 South Brae. Go upstairs and into the room with the computer. There is a Floppy Disk Case to the right of the safe, right next to the computer. Use your Disk Case Key on it to collect the Grouped Floppy Disks — a set of three disks labeled 1 of 3, 2 of 3, and 3 of 3.

There is also a locked file box on the desk in the same room. This is what you are trying to open. You will need the Part ID from the printout to crack it — more on that below.

How to Solve the Floppy Disk Puzzle – Step by Step

How to Solve the Floppy Disk Puzzle Turn on computer
How to Solve the Floppy Disk Puzzle Turn on computer

Step 1 – Turn On the Computer

Interact with the computer terminal in the upstairs room at 5 South Brae to turn it on. The floppy disk drive interface is to the left of the keyboard. This is where you will insert each disk throughout the puzzle.

Step 2 – Insert Fix-A-Disk! Software and Start It

Insert the Fix-A-Disk! Software disk into the drive first. Select Begin when prompted on screen. The software will start up and ask you to insert a disk to scan.

Step 3 – Remove Fix-A-Disk and Insert Disk 2 to Repair It

When the scan prompt appears, remove the Fix-A-Disk! Software disk. Now insert Floppy Disk (2 of 3). This is the corrupted disk. Select Repair Volume and then confirm. The software will repair the corrupted data on Disk 2.

This is the step most players miss. If you try to insert the disks in order without repairing Disk 2 first, an error will appear and the process will fail. You must repair Disk 2 before running the full sequence.

Step 4 – Insert Disk 1 and Unzip to RAM

After the repair is done, remove Disk 2. Now insert Floppy Disk (1 of 3). Select Unzip to RAM when the option appears on screen and confirm. This loads the first portion of the data into memory.

Step 5 – Insert Disk 2, Then Disk 3

Remove Disk 1. Insert Floppy Disk (2 of 3) again and confirm. Then remove it and insert Floppy Disk (3 of 3) and confirm. The data transfer is now complete. All three disks have been successfully read in sequence.

The full disk order for the final run is: Disk 1 → Disk 2 → Disk 3. Do not try to skip any of them or change the order — the computer will not progress past a step if the disks are inserted out of sequence.

Step 6 – Turn On the Printer

There is a printer on the left side of the desk. It starts off. Interact with it to power it on before you try to print anything. If the printer is still off when you try to print, nothing will come out.

Print MANUAL EML
Print MANUAL EML

Step 7 – Print MANUAL.EML

Go back to the computer and open the file MANUAL.EML. Select Print. The printer will produce a document called the Reciprocating Compressor diagram. Pick it up from the printer. This is listed in your collectibles as Clue: Reciprocating Compressor.

Look at the printout carefully. It shows a technical diagram of a compressor component with a Part ID number highlighted. That number is 956. This is the code for the locked file box.

Step 8 – Open the Locked File Box With Code 956

The locked file box is on the desk in the same room, right next to the computer. Enter the code 956 on it. The box will open.

Inside is the Barcode (South Brae) – Locker 17. This is what the entire puzzle was leading toward. Take it.

5 South Brae Safe Code – 956

The code for the locked file box at 5 South Brae is 956. This number comes from the Part ID on the Reciprocating Compressor printout produced by the MANUAL.EML file. The code is always 956 — it does not change between playthroughs or difficulty settings.

What to Do With the Barcode (South Brae) – Locker 17

Once you have the Barcode (South Brae), leave 5 South Brae and head back down to the ground level. Return to the CEG Employee Lockers building on Prosperity Way.

Find the barcode scanner on the front desk. Use the Barcode (South Brae) on the scanner. The screen will display the PIN for Locker 17: 575.

Go to Locker 17 in the locker aisles and enter the code 575. The locker opens and inside you will find two key items:

  • Boltcutters — used to cut through chained gates all over the Clara Woods Estate, opening three separate locked areas on the upper level.
  • First Mechanical Part — one of three parts needed to open the Strange Gate on Atlas Way and continue the story.

Getting the Boltcutters is a big moment in Part 4. They unlock access to the two remaining houses — 6 North Brae and 5 Upper Brae — where the other two Mechanical Parts are hidden. Without the Boltcutters, you are stuck and cannot progress.

Want to know more about the Flare Gun you can also find in the CEG Lockers? See our Silent Hill Townfall Flare Gun guide for the full walkthrough on getting it from Locker 75.

Full Disk Sequence – Quick Reference

Here is the complete disk order for the repair and run, all in one place:

  • Repair phase: Insert Fix-A-Disk! Software → select Begin → when prompted, remove it → insert Disk 2 → select Repair Volume → confirm.
  • Run phase: Insert Disk 1 → select Unzip to RAM → confirm → insert Disk 2 → confirm → insert Disk 3 → confirm.
  • Print phase: Turn on the printer → go to computer → open MANUAL.EML → select Print → collect printout.
  • Code: Enter 956 on the locked file box to get the Locker 17 barcode.

Common Problems and Fixes

The Disk Gives an Error When Inserted

This means Disk 2 is still corrupted. You must repair it first using Fix-A-Disk! Software before the main disk run. If you skipped the repair step and went straight to inserting disks, go back and run Fix-A-Disk on Disk 2. Once repaired, you can proceed with the Disk 1 → Disk 2 → Disk 3 sequence.

The Printer Is Not Producing Anything

Make sure the printer is switched on. It is on the left side of the desk and starts in the off position. Interact with it first to power it on, then go back to the computer and select Print on MANUAL.EML. If the printer is still off, the command does nothing.

The File Box Is Not Accepting Code 956

You must collect the printed document from the printer first. The game requires you to pick up the Clue: Reciprocating Compressor printout before the locked file box becomes interactive. If you try to enter the code before picking up the printout, the box will not respond. Grab the paper, then try the box.

Cannot Find Fix-A-Disk! Software

The Fix-A-Disk! Software is not in 5 South Brae. It is at Atlas Computers, the building to the east of Atlas Square on the ground level of Clara Woods. Go there, head to the back room, and use the Disk Case Key on the floppy disk case inside.

The Computer at 5 South Brae Will Not Start

Make sure you have the Grouped Floppy Disks in your inventory. Use the Disk Case Key on the Floppy Disk Case in the upstairs computer room — the case is to the right of the safe. Without the disks, the puzzle cannot begin.

What Comes After the Floppy Disk Puzzle?

After you open Locker 17 and grab the Boltcutters, use them to cut the chain on the gate at the top of the stairs in the northeast corner of Clara Woods Estate. This opens up the upper residential area where 6 North Brae and 5 Upper Brae are located.

Both of those houses contain puzzles that lead to the remaining two Mechanical Parts and their respective Locker barcodes. The 6 North Brae safe code is 736, worked out from counting items in the paintings around the house using the Lamenting Poem clue. The 5 Upper Brae puzzle involves a tape player that shifts the house between three time states.

Once you have all three Mechanical Parts, you can open the Strange Gate on Atlas Way and move the story forward into the next section of the game.

While you are in the Clara Woods area, there are several other guides worth checking:

Other Guides for Silent Hill Townfall

The Floppy Disk puzzle connects to a larger chain of puzzles in Part 4. Here are more guides covering related areas and the rest of the game:

Silent Hill Townfall Floppy Disk Puzzle – Frequently Asked Questions

Where is the Floppy Disk puzzle in Silent Hill Townfall?

The Floppy Disk puzzle is at 5 South Brae, a house on the upper residential level of the Clara Woods Estate. You access it during Part 4 of the game. You need the South Brae House Key from the Lost and Found locker at the CEG Employee Lockers building to get inside.

What is the safe code for 5 South Brae in Silent Hill Townfall?

The code for the locked file box at 5 South Brae is 956. This comes from the Part ID on the Reciprocating Compressor document, which you print out using MANUAL.EML after running all three floppy disks.

What order do the floppy disks go in Silent Hill Townfall?

First, repair Disk 2 using Fix-A-Disk! Software. Then run the disks in this order: Disk 1 (Unzip to RAM) → Disk 2 → Disk 3. Skipping the repair step or changing the order will cause an error.

Where is Fix-A-Disk! Software in Silent Hill Townfall?

The Fix-A-Disk! Software is at Atlas Computers, the building to the east of Atlas Square on the ground level of Clara Woods. Go to the back room and use the Disk Case Key on the floppy disk case to collect it.

Where is the Disk Case Key in Silent Hill Townfall?

The Disk Case Key is in the master bedroom upstairs at 5 South Brae. Open the drawer beside the bed to find it. You use it to open the floppy disk cases at both 5 South Brae and Atlas Computers.

What is the Locker 17 code in Silent Hill Townfall?

The Locker 17 code is 575. You get this by scanning the Barcode (South Brae) at the barcode scanner on the front desk in the CEG Employee Lockers building. The scanner reveals the pin number after you scan it.

What is inside Locker 17 in Silent Hill Townfall?

Locker 17 contains the Boltcutters and the first Mechanical Part. The Boltcutters are essential for cutting through the chained gates around the upper level of Clara Woods Estate. The Mechanical Part is one of three needed to open the Strange Gate on Atlas Way.

Why won’t the floppy disk work in Silent Hill Townfall?

Disk 2 of 3 is corrupted and will fail if inserted without being repaired first. You must run the Fix-A-Disk! Software and select Repair Volume on Disk 2 before the puzzle can proceed. Get the software from Atlas Computers using the Disk Case Key.

What does printing MANUAL.EML do in Silent Hill Townfall?

Printing MANUAL.EML produces the Reciprocating Compressor diagram. This document has a Part ID number on it — 956 — which is the code for the locked file box in the same room. You must pick up the printout before the box becomes interactive.

Is the Floppy Disk puzzle required to finish Silent Hill Townfall?

Yes. The Floppy Disk puzzle is mandatory. It gives you the Barcode for Locker 17, which contains the Boltcutters and the first Mechanical Part. Without these, you cannot progress through Part 4 or open the Strange Gate to continue the story.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top